Find out how to get a reliable SDI source from a GoPro Hero 3 Black camera.
This testing was all done on GoPro software version: HD3.03.02.00.
The Blackmagic Design HDMI to SDI mini converter was updated to the 2.0 level firmware.
Key points:
1/ Always power the GoPro down after making a change to the output settings.
2/ What the settings are is not always reflected on the HDMI output!
3/ The 1080p outputs are not reliably captured by all equipment.
4/ Some televisions will display the 1080p output!
5/ The only reliable outputs we would use for SDI conversion are:
PAL users – 720-100 on the GoPro which produces 720p50 on the HDMI port
NTSC users – 720-120 on the GoPro which produces 720p59.94 on the HDMI port
Here are the results of our testing with a Blackmagic Design Teranex 2D, the GoPro column shows what the GoPro is set to, the Teranex column shows what the Teranex is receiving from the GoPro: